OEM Waterproof Changing Room Plastic Locker for swimming pool

In order to deal with scratches or wear of the cabinet door during daily use, the door panel adopts a pure flat design, the surface hardness of the cabinet door is ≥3H, and the surface is friction-resistant.
The connection between the cabinet door and the cabinet body adopts an upper and lower coaxial structure. There is a retractable elastic door shaft (specification: Ø8*26mm) in the upper right corner of the door panel. Installation Gently press down the elastic door shaft, and then guide it into the door shaft hole of the top plate, then it can be installed in place in one step;

The door panel hinge adopts an integrated hinge (specification: 27.5*27*20mm), and the hinge is injection molded. It is a molded single component. During installation, you only need to press the hinge into the positioning position on the side plate to complete the entire installation of the hinge;

There are positioning blocks on the upper and lower sides of the front end of the side plate (specification: 40*35.4* 16.6mm) to increase the stability of the cabinet;

In order to prevent small mosquitoes or rainwater from entering the inside of the cabinet, there are ventilation windows on both sides of the top of the back panel. The ventilation windows are designed with a shutter structure and 90︒ angle projected ventilation holes, which is better Breathability and higher breathability;

It can choose special foot pads to adjust the height and level to ensure that the four support points of the base are effectively in contact with the ground; the entire cabinet is load-bearing, has strong pressure resistance, is stable, durable, has fine workmanship, and has no burrs or other defects.