H945-W500-D500
0102030405
OEM Waterproof Changing Room abs plastic Wardrobe bigger locker
features
Supplier qualifications: 1. GB/T 32487-2016 General technical conditions for plastic furniture, 2. Antibacterial test report; 3. Hardness CMA, CNAS test report; 4. Anti-aging CMA test report for lockers; 5. China Environmental Labeling Products Ten rings certification. 6. CMA test report for ABS raw materials; 7. CMA test report for HIPS raw materials; 8. Mildew-proof test report for lockers.
6. The door panel is made of ABS plus HIPS, a new engineering plastic, not extruded or cut from PVC. It has high strength, good toughness, impact resistance, not easy to corrode, non-toxic, tasteless, environmentally friendly and durable.
7. The door panel handle is integrated with the door panel by injection molding. It is not a rear-mounted handle, which is stronger and has no risk of falling off or being stolen when opening the cabinet. The standard production style is one handle, and it can also be increased to three upper, middle, and lower ones with injection molding of the door panel according to customer needs. One-piece handle.
8. Each door panel hinge adopts 4 integrated hinges (specification: 27.5*27*20mm) and 3 snap hinges in dual mode combination to make the door panel and cabinet stronger without the risk of injury due to falling off. The integral hinge is injection molded It is an integrally formed single component. The integrated hinge buckle is installed on the door panel before leaving the factory and shipped together with the door panel. After arriving at the construction site, you only need to press the hinge into the positioning on the side panel to complete the entire hinge. Install;
9. There are 4 towel rack slots in the door panel. You can add racks or adjust the height of the racks as needed. Each rack has 3 hanging rod holes. You can adjust the distance between the hanging rod and the door panel or adjust the distance between the hanging rod and the door panel as needed. Install multiple hanging rods.
10. There are 4 reserved slots for wire pipes on the side of the door panel close to the connection with the side panel. When smart devices are wired from the cabinet door, there is no need to cut or drill holes to affect the rigidity and aesthetics of the door panel.
11. The four corners and sides of the door panel are all arc-shaped, and the R-angle transition makes the opening and closing of the door smoother and more beautiful!
12. The upper and lower plates are 40mm thick and adopt a hidden brim design. The upper and lower plates can be hidden between the upper and lower door panels. When the upper and lower plates are used as bottom plates, fixed height support feet (45mm) can be configured as needed. The height support feet can optionally be added with a horizontal adjustment function ( 10-20mm).
13. There are two standardized reserved holes for ventilation ducts in the cabinet. The hole diameters are respectively 1. There are multiple reserved slots for standardized non-post-processed negative ion generators on the top of the cabinet to prevent the after-installed devices from falling off after being used for a period of time or affecting the inside of the cabinet. Aesthetics
14. There are ventilation windows on both sides of the top of the back panel. The ventilation windows are designed with a louver structure. The maximum width of the 90° angle projection ventilation hole is 0.17mm. It can prevent insects and provide ventilation and odor removal. There are T-shaped guide rails on both sides of the back panel.
15. The side panels are designed with front positioning blocks. After the side panels are installed in place, press up and down in both directions to position and lock the upper and lower panels to prevent the displacement of cabinet parts from affecting the opening and closing of the door after long-term use.
16. Product components have environmental protection labels, engraved production dates, and materials have shelf life. Users can check the production dates at any time.
